|
| |
Specialty Gear & Support
Clamps
Heavy Duty Bolt Clamps |
|
|
|
Specialty
Gear & Support Clamps
G7ET/G7ETM Extended Tang
(Silicone Hose) Gear Clamp |
|
|
| |
A continuous smooth shield underneath the
serrated portion of the gear clamp prevents soft silicone hose from
extruding out at high temperatures. The use of regular gear clamps on
silicone hose may result in leaks and possible hose blow off. |
|
|
|
Part Number |
Nominal
Size Inches |
Minimum
Size Inches |
Maximum
Size Inches |
 |
G7ETM-04 |
¼ |
0.31 |
0.56 |
|
G7ETM-06 |
⅜ |
0.56 |
0.88 |
|
G7ET-08 |
½ |
0.63 |
0.81 |
|
G7ET-10 |
⅝ |
0.75 |
0.94 |
|
G7ET-12 |
¾ |
0.75 |
1.13 |
|
G7ET-16 |
1 |
0.81 |
1.38 |
|
G7ET-20 |
1 ¼ |
1.13 |
1.63 |
|
G7ET-24 |
1 ½ |
1.19 |
1.94 |
 |
G7ET-28 |
1 ¾ |
1.31 |
2.25 |
|
G7ET-32 |
2 |
1.56 |
2.50 |
|
G7ET-36 |
2 ¼ |
1.81 |
2.75 |
|
G7ET-40 |
2 ½ |
2.06 |
3.00 |
|
G7ET-44 |
2 ¾ |
2.31 |
3.25 |
|
G7ET-48 |
3 |
2.56 |
3.50 |
|
G7ET-56 |
3 ½ |
3.06 |
4.00 |
|
G7ET-60 |
3 ¾ |
3.31 |
4.25 |
|
G7ET-64 |
4 |
2.50 |
4.50 |
|
|
|
 |
G6 Support Clamps are galvanized steel dipped in vinyl to prevent
chafing.
They feature a ¾” wide strap and 13/32” bolt hole. Sizes From
¼” ID to 2-⅞” ID |
|
| |
 |
|
| |
Where most T-Bolt clamps
feature a plates steel fastener, ours is all stainless. This makes the
KODAK® ideal for many marine clamping applications, especially where
gear clamps do not provide adequate holding or tightening strength. In
addition, KODIAK® clamps fulfill a wide range of industrial applications
such as engine coolant, water suction & discharge, and hydraulic
suction. G89 clamps feature a ¾” wide by 0.025” thick type 301 stainless
band. The type 302 stainless bolt is fasted by a type 304 nylon inserted
locknut. The locknut is rated to 120°C (248°F) and may be tightened to
500 inch lbs. |
|
|
|
Part Number |
Minimum
Size Inches |
Maximum
Size Inches |
 |
G89-022 |
1.38 |
1.52 |
|
G89-024 |
1.50 |
1.64 |
|
G89-026 |
1.63 |
1.88 |
|
G89-028 |
1.73 |
2.00 |
|
G89-030 |
1.88 |
2.13 |
|
G89-032 |
2.00 |
2.25 |
|
G89-034 |
2.13 |
2.38 |
|
G89-036 |
2.25 |
2.56 |
|
G89-038 |
2.38 |
2.69 |
|
G89-040 |
2.50 |
2.81 |
|
G89-042 |
2.63 |
2.94 |
|
G89-044 |
2.75 |
3.06 |
|
G89-046 |
2.88 |
3.19 |
|
G89-049 |
3.06 |
3.38 |
|
G89-052 |
3.25 |
3.56 |
|
G89-054 |
3.38 |
3.69 |
|
G89-057 |
3.56 |
3.88 |
|
G89-061 |
3.81 |
4.13 |
|
G89-065 |
4.06 |
4.38 |
|
G89-069 |
4.31 |
4.63 |
|
G89-073 |
4.56 |
4.88 |
|
G89-077 |
4.81 |
5.13 |
|
G89-081 |
5.06 |
5.38 |
|
G89-085 |
5.31 |
5.63 |
|
G89-089 |
5.56 |
5.88 |
|
G89-096 |
6.00 |
6.31 |
|
G89-100 |
6.25 |
6.56 |
|
G89-104 |
6.50 |
6.81 |
|
G89-108 |
6.75 |
7.06 |
|
G89-116 |
7.25 |
7.56 |
|
G89-124 |
7.75 |
8.06 |
|
G89-132 |
8.25 |
8.56 |
|
G89-135 |
8.44 |
8.75 |
|
G89-148 |
9.25 |
9.56 |
|
G89-164 |
10.25 |
10.56 |
|
| |
|
